The Hidden Secrets Of Replacement Window Handle

Choosing uPVC Replacement Window Handles

Nearly all customers agree that these upvc replacement window handles are simple to install and feel like good quality. It is important to be aware that the handle you pick for your window has to be appropriate for your.

The height of the step is the most important factor. This is the distance between the handle and the base or frame. Other considerations include locking mechanisms and styles.

Replacement parts

There is a broad selection of replacement upvc window handles available to buy. They are available in a variety of colours and styles so there's sure to be something that fits your windows. It's easy to impulse buy especially if the handle fails, so it's best to be patient and examine the details prior to committing to buying a new one. The first thing to consider is what type of upvc handle you have now and what the difference between the kinds is. The table below lists the most common handles to help you choose the one that will match your window.

Espag handles are the most common and are used on the majority of modern double-glazed windows. They are typically attached to the frame by two screws that are screwed in from both sides.

They have a spindle bar at the back, which can be of a variety sizes. This will determine how they operate (either left or right handed). It is essential to know the measurements of the handle you currently must ensure that you get the right replacement.

The arm is fixed to the frame using two bolts, just like the Espag handle. However, the handle has a lower projection, so that it doesn't damage your blinds. This is a great option for those who want the handle to blend in with your blinds and have upvc windows.

Cockspur handles look similar to Espag handles, but they have a nose that closes over a wedge that sits on the frame of the window. This type handle is found on older wooden and upvc windows.

Tilt and turn handles are often found on casement windows. They can be operated either by turning the handle or pressing at the top of the window. This allows you to open the window from inside and clean it from outside without having to climb a ladder or step across the garden fence. They are also a great option for those with limited mobility and installing increase security and accessibility in the home.

Hints and tips

There are a number of different kinds of uPVC window handles, and a lot of people will have to replace them at some point. It's important to have some tips and tricks to make the job easier.

The first step is to determine what kind of handle you have at home. Depending on what the handle is attached to and what locking mechanism it is using it might be necessary to replace the entire handle and lock. If the roller cams and shoot bolts (espags) are jammed, or seizing up, you'll need to replace them, along with the handle.

Thankfully, the majority of uPVC handles follow industry standards and are similar. This allows for a relatively simple task. The first step is to remove the screws from the handles. These are usually using pozi-drive screws. Once the screws are removed, you will be able to take apart the handle.

It's a great idea note how much the spindle protrudes from the base of the handle after you take it off it. This will help you to determine the length of the spindle for a replacement double glazed windows handle. Simply measure the amount that the square peg extends out of the bottom of handle.

This is particularly important for inline uPVC window handles because they are always straight and will only open left or right, and won't operate in the middle. It's a good idea in the event that you're not certain of the type of handle you have in your home, to borrow a handle to see how it functions.

Another great tip for working out what the handed of the uPVC window handle is to look at how the handle moves when it is operating. Handed handles will turn either clockwise or anti-clockwise. If you're not sure then you can always have someone else open the window with the handle, and work out how it operates in that way.

Measure the spindle

It can be difficult to pick the appropriate replacement handle for your window since not all handles have the same dimensions. The spindle is what is the mechanism that locks the window and it is essential to ensure that when installing the new handle it is measured to the length of the spindle accurately to ensure that it fits. There are a variety of uPVC handles that function in different ways. It is essential to identify the type you have and the locking system you have.

The spindle on the espag handle extends out from the handle's rear, and is connected to the lock gearbox inside the window frame. When you turn the handle, this then turns the lock in the gearbox, allowing you to open the window. They are usually used on uPVC casement windows and they can be locked with keys to give extra security.

Cockspur handles are typically found in older double-glazed uPVC window frames. They have a "nose", which is secured by a wedge-shaped striker block. They are also quite simple and they can be locked with keys. These handles can be a little more difficult to locate replacements for because they aren't as popular as the handles that have a swivel.

If you own a tilt-and-turn uPVC and you require a new handle that has a different locking mechanism. The handle can tilt the window, and allow it to rotate around to fully open it. You will need to make sure that the handle you select has a spindle size at least 55mm, or it won't be able to penetrate the frame of the window.

You can use the same method to take off and replace this kind of uPVC handle, but you must be cautious when you remove the old one. It may be necessary to open the window wider than usual to access both screws that secure it to the frame. Once you have fitted your new uPVC handle and verified that it is in the correct position, you can tighten the screws, and test the lock to make sure it functions properly.

Install the new handle

Once you have the right replacement handle, it will simply screw into the appropriate position. This will require a screwdriver, but might be easier using an electric one. When screwing, it is important not to over tighten the screws because this can cause the handle to break or warp.

The other important step when installing the new handle is to insert the spindle. The spindle is a part that is inserted into the handle to control the locking mechanism of the window. It is essential that it fits correctly as this will ensure the window can be shut and opened securely.

There are a variety of types of uPVC handles. They include:

Espagnolette Handles are inline handles which can be used to open tilt and turn windows.

Cranked Espagnolette Handles: These are similar to inline handles but have a curvaceous shape which is ideal for hard-to reach windows.

Tilt and turn handles - These are used to operate the opening and closing mechanisms for tilt and turn windows. They also allow for the movement of windows.

The majority of uPVC window frames come with these. They are often referred to as 'Bay Windows' in the UK.

If your uPVC window handle is damaged, it can be very frustrating. But, there isn't a need to replace the entire uPVC windows because of a broken handle. There are a few basic steps you can take to repair or replace a damaged uPVC handle.

Fixing your broken window handle swiftly by identifying the model and determining the spindle. When working with windows and tools it is crucial to prioritize safety. But, this is a relatively easy task. It could be the difference between a safe and secure home, or a window that is easily opened. Bridgewater Glass is the place to go if you're in need of help or want to speak with an expert regarding replacing your window handle. Our team is skilled and knowledgeable to help you with any issues.